Chase 3.75m Single Sectional Roof Ladder

The Chase 3.75m Single Sectional Roof Ladder is designed and manufactured in the UK provide the ultimate in safety on the roof.

These heavy duty ladder sections are manufactured to BSEN131 standard using industrial strength aluminium, with oval section stiles and heavy-duty non-slip rungs and incorporate a heavy-duty ridge hook. To prevent any damage to the roof they have rubber covered bearers bars to distribute weight evenly. Unlike the majority of roof ladders available these ladders are Built from materials that exceed the performance requirements of BSEN-131 Professional and are rated at 175kg.

Folding bearers

Due to continued problems with damages caused by our carriers we have changed the way the bearers are fitted to both our single section and double extending roof ladders. Each bearer has two holes at the ends that allow it to be fixed to the ladder. The fasteners used to be blind fastener ‘mono bolts’ we will now use hexagon head high tensile bolts with nyloc nuts. A single fixing will be made at each end of the bearer which will allow it to pivot and sit flat against the ladder stiles. To secure the bearer in position the customer will need to square it up and fit the additional two nuts and bolts.

ROOF LADDER RIDGE HOOKS
We continue to experience problems with carriers when we send out ridge hooks fully assembled. We have therefore decided to supply these flat packed with comprehensive fitting & assembly instructions. This will ensure that losses and damage whilst in transit are greatly reduced. We’ve already been doing this for some customers for a while now and can now switch over completely.

The Chase Single section Roof Ladder designed and manufactured in the UK provide the ultimate in safety on the roof.

• Ladder sections meet the requirements of BSEN131 Standards.
• Main roof ladder section 2.4m long.
• Extension pieces with spigots joints can be added to allow you to make the ladder up to the length required-complete flexibility.
• Aluminium construction, lightweight but strong.
• Strong oval box section stiles.
• Serrated round rungs at 300mm centres.
• Ridge hooks constructed from 25mm square tube with 100mm diameter running wheels.
• Bearer bars fitted with protective PVC sheathing.
• Additional bearers can be fitted if required.
• 175KG maximum permissible vertical static load.

Please note: Roof hooks are supplied loose and the ladders jointed for ease of carriage. These require bolting together by the customer – fixings are supplied.